How to design, create, and program Arduino and Raspberry Pi

 

How to connect a Accelerometer MMA7631 to Raspberry Pi

This project uses a MMA7631 Accelerometer Board and ADS1115 A/D Converter. The MMA7361L is a low power, low profile capacitive ...
Read More
KY-040

How to connect KY-040 Rotary Encoder to Raspberry Pi

In this project we are going to use a Rotary Encoder KY-040 to control a  Step Motor  and Display a ...
Read More

How to connect IR Remote control to Raspberry Pi

In this project we connect an IR remote decoder with a Serial interface to Serial port of Raspberry Pi. We ...
Read More
MFRC-522 RC522 RFID Kits

How to connect RFID Reader to Raspberry Pi

In this exercise we connect the RFID Reader to Raspberry Pi. Connect RC522 to Raspberry Pi Name Pin # Pin ...
Read More

How to connect DHT22 to Raspberry Pi

DHT22 is a Temperature and Humidity Sensor. In this project we connect a DHT22 Sensor to a Raspberry Pi with Raspbian ...
Read More

How to Connect 1 Wire DS18B20 Temperature Sensor to Raspberry Pi

In this project we use a 1 Wire DS18B20 Digital Thermometer and program our Raspberry Pi to read the Temperature. It ...
Read More
KY-023

How to control Relays and Joystick with Raspberry Pi

It is possible to control Relays directly through GPIOs, but for reading data from KY-023 Joystick we need two channels.  ...
Read More
HC-SR04

How to use Ultrasonic Sensor HC-SR04 with Raspberry Pi

In this project we connect an HC-SR04 an Ultrasonic Sensor to Raspberry Pi. We use Python Threading Library to read ...
Read More
ADS1115
Installing Adafruit_ADS1x15 Library Open a terminal window and issue these Commands git clone https://github.com/adafruit/Adafruit_Python_ADS1x15.git cd Adafruit_Python_ADS1x15 sudo python setup.py install sudo ...
Read More
Today we will use Tkinter to display a gauge and receive the info through serial com. On Raspberry Pi Create ...
Read More
 How to add Horizontal a Vertical Scale using tkinter On Raspberry pi Create a directory download test_slide and unzip it ...
Read More
In this video we show you how to create a bar scale using Tkinter and Raspbian on Raspberry Pi. Instructions: ...
Read More
Python Gauge Tkinter
Project Goals The goal of this project is to use python to create a rotary slider using Tkinter.  A rotary ...
Read More
Project goals: The aim for this project is to Use python programming tools & tkninter library on Raspberry PI to ...
Read More
Project Goals The goals of this project are to: install Raspbian OS on Raspberry PI and connect to Raspberry PI ...
Read More

Comments are closed